How do I turn it on?
Hold down the power button for 1 second. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode.
Awake mode operation:
Pressing the power button will turn the blade on and activate the sound and light effects.
How to use it when the blade is turned on:
- Blaster deflection - Tap the button once
- Saber lock-up: Hold for 0.5 seconds, the button will flash 1 time, then release
- RGB Infinite Colour selection: Hold for 1 second, the button will flash 2 times, then release to cycle rainbow blade colors. Wait for the desired colour and tap it to set the color.
- Solid colour selection: Hold for 1.5 seconds, the button will flash 3 times, then release to cycle solid blade colors. Wait for the desired colour desired color and tap it to set the color.
- Turning off the blade: Hold for 2 seconds, the button will flash 4 times.
Changing sound and light modes when the blade is turned off:
- Select sound volume: Hold the power button down for 0.5 seconds, the button will flash 1 time while the blade is off
- Select a light effect: Hold the power button down for 1 second, the button will flash 2 times, while the blade is off
- Turn on/off Motion Control: Hold the power button down for 1.5 seconds, the button will flash 3 times, while the blade is off
- Flash on Clash: Hold the power button down for 2 seconds, the button will flash 4 times while the blade is off
- Sound font change: Hold the power button down for 2.5 seconds, the button will flash 5 times while the blade is off
- Sound font change using Motion control: Quick twist
- Hold 10 seconds to enter sleep mode. If the saber sits idle for 10 minutes it will also enter sleep mode.
Sleep mode operation:
When the saber is in sleep mode there will be no lights or sounds to preserve the battery charge.
